Industrial machinery parts are of course cleaned with ultrasonic cleaners.
Generally, mechanical parts need to be cleaned before, during and after assembly, and some parts need to be cleaned as needed after trial operation. The purpose of cleaning parts is to remove all kinds of dirt remaining on the surface, such as casting sand, iron filings, rust, abrasives, oil stains, dust, etc.
The cleanliness of the parts after cleaning will directly affect the assembly quality and service life of the construction machinery, so the cleaning of the parts is a very important link in the assembly of construction machinery. Industrial ultrasonic cleaners are handy for cleaning the surfaces and small internal parts of slits, grooves, deep holes and blind holes. At the same time, it also has a good effect in removing oil, rust and oxide.
The main application scenarios of industrial ultrasonic cleaners are to clean oil, wax, carbon deposits and dirt from hardware parts.
Ultrasonic cleaning of oil stains has natural advantages. The principle of the ultrasonic cleaning machine is to convert the high-frequency oscillation signal emitted by the ultrasonic generator into a high-frequency mechanical oscillation through the transducer, and transmit it to the cleaning solvent. The ultrasonic waves radiate forward in the cleaning liquid, causing tens of thousands of tiny bubbles in the liquid. The tiny bubbles in the liquid vibrate and burst under the action of the sound field, which can completely strip the pollutants from the surface of the product.